Description
[Tamiya's first shaft 4WD racing buggy, which became a long-awaited model] Introduced in 1985 as Tamiya's first shaft 4WD racing buggy. The battle-like form with a low center of gravity design and a high-performance running packed with innovative mechanics Many fans were captivated. The chassis is a three-part structure composed of front and rear gear boxes and center monocoque. High maintainability is attractive. Suspension is a double wishbone equipped with mono shock oil damper and stabilizer both front and rear. In particular, the rear is a progressive type that uses a connecting plate and a push rod. In addition, the sealed front and rear gear boxes had thrust ball bearings and diff gears built in. Since many dedicated parts for hot shots were used, It became a machine that fans couldn't reach, but it made me admire it. Hotshot became one epoch-making machine that established the genre of 4WD racing buggy. Resale request No.1 release the to meet the voice and facsimile edition.
Charisma reprint basic configuration of updating intact]The hot shot (2007) is a reprinted version that updates only the parts that do not fit the current situation and the parts that are difficult to assemble, based on the design concept that we do not put as much effort into the form and structure as possible. Shaft drive 4WD, adjustable type mono shock damper. The front and rear drive shafts and propeller shafts have been changed to highly reliable dog bone types, while the main mechanics such as the front and rear double wishbone suspensions equipped with are changed. The oil damper has also been changed to the currently mainstream diaphragm type. Since the kit uses ESC for the speed controller, the rear aluminum heat sink is not necessary originally. However, this part, which is also the point of the rear view of the hot shot, was left as it is. Hot that still gives a fascinating charm Shot. I am looking forward to comparing with the modern 4WD off-road racer.
[Basic specifications] ● Overall length 390 mm ● Overall width 235 mm ● Overall height 150 mm ● Vehicle weight approximately 1270 g ● Tread = 194 mm (both front and rear) ● Tire width / diameter = F28 / 82 mm R34 / 82mm ● Frame = ABS resin monocoque ● Drive system = Shaft drive 4WD ● Differential gear = 3 front and rear bevels ● Steering = 2-split tie rod type ● Suspension = 4-wheel double wishbone ● Gear ratio = 10.04: 1 8.70: 1 ● Motor = RS540 type ● Speed controller = ESC specification
[separately required] ● RC mechanism: EX-SPEC GT-I 2.4G (set for electric RC car) or 2 channel R / C unit with ESC ● Battery / charger: Tamiya 7.2V Various racing packs or 7.2V advanced packs
Charisma reprint basic configuration of updating intact]The hot shot (2007) is a reprinted version that updates only the parts that do not fit the current situation and the parts that are difficult to assemble, based on the design concept that we do not put as much effort into the form and structure as possible. Shaft drive 4WD, adjustable type mono shock damper. The front and rear drive shafts and propeller shafts have been changed to highly reliable dog bone types, while the main mechanics such as the front and rear double wishbone suspensions equipped with are changed. The oil damper has also been changed to the currently mainstream diaphragm type. Since the kit uses ESC for the speed controller, the rear aluminum heat sink is not necessary originally. However, this part, which is also the point of the rear view of the hot shot, was left as it is. Hot that still gives a fascinating charm Shot. I am looking forward to comparing with the modern 4WD off-road racer.
[Basic specifications] ● Overall length 390 mm ● Overall width 235 mm ● Overall height 150 mm ● Vehicle weight approximately 1270 g ● Tread = 194 mm (both front and rear) ● Tire width / diameter = F28 / 82 mm R34 / 82mm ● Frame = ABS resin monocoque ● Drive system = Shaft drive 4WD ● Differential gear = 3 front and rear bevels ● Steering = 2-split tie rod type ● Suspension = 4-wheel double wishbone ● Gear ratio = 10.04: 1 8.70: 1 ● Motor = RS540 type ● Speed controller = ESC specification
[separately required] ● RC mechanism: EX-SPEC GT-I 2.4G (set for electric RC car) or 2 channel R / C unit with ESC ● Battery / charger: Tamiya 7.2V Various racing packs or 7.2V advanced packs
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.