>> ROAR Approved
>> USVTA Approved
1.1 Output: Continuous 45A, burst 260A.
1.2 Input: 4-9 cell NiMH/NiCd or 2-3S LiPo.
1.3 BEC: 6V@2A linear mode built-in BEC.
1.4 Resistance: 0.0006 Ohm.
1.5 Motors Supported: Sensored and sensorless brushless.
1.6 Cooling Fan: 5V * Note #1
1.7 Suitable Motor:
With 2S Lipo or 4-6 cell NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T
With 3S Lipo or 7-9 cell NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T
1.8 Suitable Car:
1/10, 1/12 on-road or off-road SPEC race (Zero timing race).
1/10 rock crawler pro race.
1.9 Size: 33mm(L) * 28mm(W) * 31mm(H) (Cooling fan height included)
1.10 Weight: 59g (Weight of cooling fan not included)
* Note #1: Cooling fan power supplied by built-in BEC.
2.1 Low cost, high performance.
2.2 Small and light weight.
2.3 Drives sensored and sensorless brushless motors, best feeling of control.
2.4 The internal timing is always zero degrees to be compliant with the rules of SPEC races such as ROAR SPORTMAN.
2.5 Multiple protection features: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection.
2.6 Plenty of programmable items.
2.7 Easily programmed with the SET button, LED Program card
, Professional LCD Program Box
and USB Link Software
2.8 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.9 Also suitable for rock crawler pro races when using “Crawler” working mode.
The ESC can be loaded with many different firmware versions by the user.
The options in italic in the above table are the default settings of the ESC.
(* The programmable items and the default settings maybe changed in different firmware versions without prior notification.)